ATS2D3G NC LFG

ATS Series Anti-Tampering Detect Switches Features/Benefits • Normally closed function •  Vertical detect • Reliable long time compression • IP54 • Tape & reel • RoHS compliant and compatible Typical Applications • Smart meters • Alarm systems • Anti-tamper devices Specifications Electrical GOLD FUNCTION: Momentary action. MAXIMUM POWER: 0.2 VA 1 VA CONTACT TYPE: SPST Normally Closed. MAXIMUM VOLTAGE: 32 VDC 32 VDC TERMINALS: Gullwing type for SMT. MINIMUM VOLTAGE: 20 mVDC 20 mVDC Mechanical MAXIMUM CURRENT: 10 mA 50 mA SWITCHING FORCE: ≤ 2 N MINIMUM CURRENT: 1 µA 1 mA TRAVEL TO BREAK: 0,7 mm CONTACT RESISTANCE: ≤ 350 mΩ TOTAL TRAVEL: 1,1 mm INSULATION RESISTANCE: >1G Ω DIELECTRIC STRENGTH: ≥ 250 Vrms Environmental Packaging Switches are delivered on continuous tape, in reels of 2,000 pieces GOLD SILVER SILVER OPERATING TEMPERATURE: –40ºC to +125ºC –40ºC to +85ºC STORAGE TEMPERATURE: –55ºC to + 125ºC –40ºC to +85ºC Process SOLDERING: Compatible with lead free reflow process NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on the next page. For additional options not shown in catalog, consult Customer Service Center. A Detect E T S 2 D N C G L F Actuator 2 Soft actuator - height 3.20 mm Operating Force D 2 N detect LFS Lead free compatible. Silver Plated LFG Lead free compatible. Gold Plated Contact Material 1 Silver 3 Gold Termination G Gull wing Switch Function NC Normally closed Dimensions are shown: mm Specifications and dimensions subject to change 3 Sep 20 E–56 www.ckswitches.com ATS Series Anti-Tampering Detect Switches SERIES 0,15 1,65 0,15 1,9 0,2 MARKING D-1 D-3 0,1 PART NUMBER ATS 2D1G NC LFS ATS 2D3G NC LFG 3,2 0,25 7,3 0,15 A A 3,8 1 0,1 6 0,65 0,3 SECTION A-A 1,4 Recommended PCB layout 6 8 CHARACTERISTICS Electrical change area The product must be activated between He (off) min and Hm Hm He (off) min E Height measured from base of the switch Minimum Electrical Height (He (OFF) min) Product height for contact opening Contact closing: the switch must be completely release Detect Maximum force at Hm = 6N Minimum Activation Height (Hm) Switch damage can occur if product is actuated below minimum actuation height (Hm) 2.1 mm 2.5 mm Dimensions are shown: mm Specifications and dimensions subject to change 3 Sep 20 E–57 www.ckswitches.com ATS Series Anti-Tampering Detect Switches TAPE & REEL SECTION B-B 16 24 2 C 8 0,1 2 0,05 +0,1 1,5 0 2 0,05 + 0,3 12 - 0,1 5,5 7,65 6,25 3 0,05 1,75 SECTION C-C 4 0,1 B 0,3 0,02 B 2,1 4 3,5 4 3 C 1,5 0,25 -1-2-3-4- 10 sprocket hole pitch cumulative tolerance 0.2mm Carrier camber not to exceed 1 mm in 1000 mm Dimension 6.25 and 4 measured on a plane 0.3 mm above the bottom of the pocket Dimension 3.5 measured from a plan on the inside bottom of the pocket to the top surface of the carrier. - 5 - Angle is not marked : 3° Scrolling direction in assy machine SCALE 2 Detect E Dimensions are shown: mm Specifications and dimensions subject to change 3 Sep 20 E–58 www.ckswitches.com